Tiny Table Vise Clamp

This model is a compact 3D‑printed vise-style PCB holder, designed for electronics work such as soldering, inspection, assembly, and small mechanical tasks. The design is fully printable on any standard FDM 3D printer and requires no special hardware unless optional metal inserts are added. Features: • Dual‑Jaw Clamping System - One fixed jaw integrated into the base. One sliding jaw driven by a threaded screw. Smooth clamping action suitable for PCBs, small parts, and precision components. • Gear‑Style Adjustment Knob - Provides excellent grip and torque for manual tightening. Easy to operate even with gloves or slightly oily hands. • Printable Threaded Screw - Optimized for PLA/PETG durability. Compatible with M8/M10‑style tolerances depending on slicer settings. • Stable Mounting Base - Flat base with a mounting hole for m4 screws. Can also be used free‑standing on a desk. Recommend using anti‑slip pads or adhesive feet. Recommended Print Settings: • Infill: 40–60% (Grid, Gyroid, or Cubic) • Walls: 3–4 perimeters • Supports: Only under overhangs >50° • Print speed: 40–60 mm/s • Cooling: On for PLA, moderate for PETG • Layer height: 0.2 mm (0.1 mm for high detail) Suggested Materials: • PLA+ (Recommended for general use) - Easy to print, Good dimensional accuracy, Suitable for light to medium clamping force • PETG (Recommended for durability) - Higher strength and flexibility, Better resistance to repeated tightening, Slightly more difficult to print • ABS / ASA (Optional) - Strong and heat‑resistant, Requires enclosure, Best for workshop environments Design Details: • Gear Knob - Diameter: 30x30mm, Teeth: 34 evenly spaced, Grip texture: radial ridges, Center hole: matched to printed screw shaft • Threaded Rod - Large, deep threads to reduce wear • Jaws - Reinforced with ribs to prevent cracking, Smooth inner faces to avoid PCB damage Post‑Processing Suggestions: • Light sanding of the screw threads for smoother rotation • Optional silicone grease for long‑term durability • Add rubber pads to the jaws for delicate components • Heat‑set inserts can be added for extreme durability If you encounter any printing difficulties or identify a design flaw, please inform me so I can update the model.