Tenere 700 airbox cover

Summary I designed this thing to be a replacement for the original cover using the original filter. I had the ECU flashed and the flashers recommend you remove the snorkel leaving a very blunt hole in the origonal cover. So I designed this cover with an inlet that lets the air enter a little smoother. It has the same diameter hole as the original cover. Tested it today and it works just great! Print in PETG or ABS for heat resistance. Print Settings Printer: Bambu Lab X1 Carbon with AMS Rafts: No Supports: Yes Resolution: 0,2mm Infill: 15% Filament: Generic PETG Green