matplace
Lithophane Tutorial

Lithophane Tutorial

autor XYZ Space · Printables

Vytiskněte si ho pro sebe

Licence (CC BY-NC (jen nekomerčně)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
CC BY-NC (jen nekomerčně)
Největší rozměr
asi 85 mm
Odhad tisku
asi 18 g filamentu, 1 h 35 min
Cena u nás
od 100 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.

O modelu

Easy to print picture that shows surprise under light! Printing instructions - use white filament!Use either 100% infill or many walls/perimetersRecommended layer height is 0.12 however if you want the most detailed print, go lower. Maximum layer height in my opinion is 0.2Use BRIM and print in given positionNo supports In case you want to do your own lithophanes, here is how I did it Find suitable picture - good contrast; usually simpler picture prints better than one with lots of detailsoptional - use photoshop or any editing software (like the one in your phone gallery) and boost contrast, play with vibrance, saturation and sharpness.     3. Upload your image to 3dp.rocks - on top click “Images” and upload yours then move to             “Model” where you choose the type (curved, flat..) and hit refresh.     4. All there is left to do is change “Settings” - I use the one below this paragraph. The most            important is “Maximum size (MM)”, that changes the model size. After any change you              need to click REFRESH in the model settings.      5. Download your STL file and put it into slicer      6. Enjoy! Note: This is not the final version of this page, I will keep updating it - mainly to make it better looking and readable. If you do not understand something, please ask in comments so I can update it :)In case you have any requests, feel free to send me a message and I will try to help you out! 

Podobné modely