Lithophane Frame Light Box with Fairy Lights

For my model I used small battery powered fairy lights with 40 LEDs.I made different variants so that most common picture formats can be used. The heigt is always 130mm. For the model in the pictures I have used a 3x2 picture.For perfect fit I had to do a little bit of sanding on the frame of my lithophane. If you can not make yours fit fit you can use one of the models with higher tolerances (called "_LOOSE") Print Settings:Support needed!! The pins in the middle don't need support so you can use a suport blocker in that area.I suggest printing it laying flat. Lithophane Settings:I used this website to create my lithophane: Image to Lithophane (3dp.rocks)Make sure you use the same settings as I did (you can use different Thinnest Layer and Vectors Per Pixel settings if you want):