Unknown source
Laptop stand
🏭 100+ tiskáren
·
across Czechia
·
⏱ pay after printer accepts
Description
Laptop stand with cables holes.
In slicer remove top and bottom layer and add infill as wanted. I used honeycomb.
For link I recomend use at least 45% infill. I use more than 2 perimeters to make it stronger.
Material: PLA, ABS, PET-G, other
Layer high: 0,3 or lower
Similar models
from 690 Kč
from 420 Kč
from 280 Kč
from 310 Kč
