Kumiko Asanoha Coaster

💮 The Concept This project revisits the traditional Japanese Asanoha (hemp leaf) pattern, often used in the art of Kumiko, to create functional and aesthetic coasters. Designed to be easy to print, this set brings a touch of geometric sophistication to any interior. 🛠 Included in this Model: • Shape Variants: 3MF files for both Square and Round versions. • Dedicated Holders: Two elegant holder models, perfectly fitted to accommodate 4 coasters each. ⚙ Recommended Print Settings Here are the settings I used to achieve the best results: Parameter Recommended Value Technical Note • Nozzle 0.4 mm Standard. • Layer Height 0.2 mm Good balance between speed and detail. • Infill 15% - Grid 10% may be sufficient. • Walls Minimum 2 Use 3 to further improve strength. • Others No supports, No skirt Unless your build plate has adhesion issues, a Brim is not necessary. https://www.patreon.com/cw/DSCMaker