Gridfinity 4x4 and 4x2 base French cleat mount

Two options for attaching back (cleat) on the two piece version • CA glue. Designed with a mating registration surfaces to locate horizontally in the center and to give lots of strength for almost all purposes with just CA glue • Hardware, made for ¼ bolts • 2 x ¾" long ¼ 20 bolt • 2 x ¼ 20 nuts Design details: • Holes on the bottom serve to prevent dust accumulation • Made for 3/4" plywood (note: 3/4" plywood is usually closer to 0.7" thick, or around 18mm). • Designed around standard imperial specs common in most US shops (sorry world) • Could easily be remixed for just about any mounting system Print details • Use snug supports just for the vertical holes, no other support needed (might even be able to get away with eliminating those) • Adaptive layer height saves a bunch of time • Printed great on a P1P, using Bambulabs Matte PLA