Neznámý zdroj
FOUR COLOR - HueForge multicolor Spiderman in a hoodie
⚠️
Pozor na autorská práva. Modely značek tiskneme jen pro osobní účely. Pro firemní dárky zvolte vlastní design.
🏭 100+ tiskáren
·
po celé ČR
·
⏱ nabídky do 24 h
Popis
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyTerra Army Red Transmission Distance: 0.3
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA PolyLite White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Army Red
At layer #27 (2.24mm) swap to Sapphire Blue
At layer #33 (2.72mm) swap to White for the rest.
Podobné modely
Poptat tisk
