Filament Dry Box Mount for Multiboard

Original Upload on MakerWorld I entirely rebuilt the remix by Paradox69 in order to optimize on filament usage (reduced by 22%) without sacrificing strength (I believe) and to improve strength I made the t-bolt holes spread out wider ([x][ ][x][ ][x] instead of [ ][x][x][x][ ])  I made the slot slightly wider to fit my Utopia Cereal Containers, hopefully it will still fit the containers it was originally designed for Printing Print one or more of the mounts with 3x of the included T-bolts (20 mm Small Thread, Flat Head, T-Bolt) per mount For additional strength between multiple brackets, print a connector clip to join two together Installation The bracket spans 5 threaded holes on the Multiboard (and extends out halfway on each side). I printed 9x3 plates to maximize my printer, but I believe that 6x3 would be the strongest configuration (as the mounting screws would align with the mounts) I have included a stacked 6x3x4 Multiboard print file for efficient printing. The boards will stick together, but can be pried apart with a little force and should separate nicely I also made this Multiboard T-Bolt Driver Bit which can greatly help with installation