Unknown source

Drill bit case- metric

🏭 100+ tiskáren · across Czechia · ⏱ pay after printer accepts

Description

Drill bit case for metric drills. With size markings. Drills incrementation 0,5mm from 1-10mm. Fasteners for assembly are needed. In drill holder I recommend to tap a M4 thread before fasten the M4 screws. Screws : M4x20mm x 2pc M3x25mm x 2pc M3x30mm x 1pc Nuts: M3 x 3pc Material: PLA, PET-G etc, Layer high: 0,3 or lower Supports needed for bottom part for latch.