Atlas lamp

A sculpture of Atlas with a cutout for a lamp, holding a lithophane earth. ###Assembly: 1. Glue the halves of the earth together. 2. Glue the earth onto Atlas. 3. Insert lamp that fits hole. ###Tip: I suggest you disable "Compensate Wall overlaps" for the earth lithophane if you're slicing in cura - otherwise it seems to make an absolute mess of the surface. Depending on your infill% and lamp weight, the print might become unstable. If you're conserned abouts stability, I recommend you add some sort of stand/pedistal/floor underneath Atlas. ###Different sizes: There are two sizes available in the downloads, normal size and "mmm_75" variants. The 100% size needs a print XY area of at least 23x23cm, and the 75% needs 17x17cm. The standard version is made to fit a normal E27 lightbulb, the smaller variant needs a smaller light-fixture. You can download the zzz_Alt_model if you want to make your own custom-tailored cutout for your own lamp. ###Warning: Don't rescue the earth model. The lithophane earth has thin walls to let light through - if you rescue the model, the earth will not slice properly.