ULTIMATE Spool Holder

O modelu

The ULTIMATE filament spool holder.   THANK YOU FOR DOWNLOADING IT! IMPORTANT, PLEASE READ:      1. If you have problems with tolerances, please print this model by Asraff Amzani (thanks for) and carefully read the descriptions.        THIS IS EXTREMELY IMPORTANT, ONE TIME SETTINGS ADJUSTMENT - ESPE  CIALLY FOR FUNCTIONAL PRINTS.     2. Higher the resolution, better the tolerances PRINTING TIP - avoid any kind of seams alignment, when printing the rollers. This will keep them balanced and will help ball bearings insertion.   UPDATE 08.10.2023: New base side design! Now the rails are shorter for better base sides look. I hope you will like it. After a while the old design will be moved as a separate remixed model (approx. a month). UPDATE 02.07.2023: Added a single ring rollers of both types.   UPDATE 26.04.2023: • Removed logos from the rollers for eliminate the rattling when the spool rolls over. • All bases have been redesigned, so now they have “nests” for 10x2 mm or 10x3 mm circular magnets or rubber/feather/silicone pads. UPDATE 20.01.2023: Added base without pattern. A wall mounting console can be downloaded from here. UPDATE 28.10.2022: Added roller and rail for 2 kg spools (122 mm wide). UPDATE 17.06.2022: Added instructions in the photos section.  ……………………………………………………………………   UPDATE 28.04.2022: The spool holder was totally redesigned, mostly due to printing and tolerances optimization. —————————————————- UPDATE 24.02.2022: Added new pattern. The difference - pattern-2 has a narrow contour strip around the base.   Update 24.01.2022: Apologies to everyone! I forgot to upload the rollers… .  Done ☑. Sorry about that! Update 28.12.2021: All files has been slightly tuned.   Update 27.12.2021: Aded two new bases, so now you can connect two or more spool holders together using 2xM3x12 mm screws and 2xM3 hexagonal nuts. ==================================== Extremely efficient and flawless design. The purpose of the inner rings