Sound Blaster G3 Underdesk holder
MakerWorld · Vergil
autor Fritz · Printables
Licence (CC BY-NC (jen nekomerčně)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.
Nahrát soubor a vytisknoutA small box in the shape of a scaled dragon egg with a hinge and latch that snaps shut. This is a remix of Tiny Dragon Egg Box by GreyFluffs and Dragon ornaments by Syxiaolu94 with some modifications to make them sturdier, so that it survives the first contact with kids. Also I wanted to print it in silk filament, which looks shiny and awesome but has terrible layer adhesion, so the original model broke when trying to close it for the first time after assembly. The eggs you see on the photos were used as giveaways on a kid's birthday party. Sadly two hinges broke before I could tell the kids to be cautious when closing the lid, but I was able to glue them back together with superglue (CA glue). Update v2: • Improved custom supports for the top half. Removed “dragonegg-sturdier-top-with-supports.stl” (see below for instructions). Printing Settings: • (the 3mf file contains these settings already for OrcaSlicer 2.2.0) • Layer height 0.15mm. • Use the custom supports. Select both top.stl and supports-v2.stl and drag the files into the slicer window. When asked if you want to load it as a “single object with multiple parts” click Yes. • If you don't want that, paint in your own supports for the top half. The “roof” does not need supports, only the rim of the egg. • Disable scarf seams for the “teeth” on the rim of the top half. Otherwise these routinely come loose while printing because they are so small. • When using rainbow filament, print the bottom first, then the top to preserve the color gradient (see photos or .3mf file). • When using Silk PLA, increase the nozzle temperature a bit to increase the strength of the hinges. Silk PLA has notoriously bad layer adhesion, and the hinges have a very small cross section. • Don't use the old file “dragonegg-sturdier-top-with-supports.stl”, or at least right click it in the slicer and select “Split → To Parts”. Otherwise OrcaSlicer and BambuStudio will bond the supports too firmly to the top egg shell. • You ca
MakerWorld · Vergil
matplace
matplace
Printables · Mademan666
matplace
Printables · Joris
matplace
matplace
Cookies a měření. Nezbytné cookies jsou vždy; měření návštěvnosti a reklamy jen s vaším souhlasem. Víc o cookies