matplace
TILT PHONE STAND

TILT PHONE STAND

autor Matthew_Ghost · Printables

Vytiskněte si ho pro sebe

Licence (CC BY-NC-ND (jen nekomerčně, bez úprav)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
CC BY-NC-ND (jen nekomerčně, bez úprav)

O modelu

• Compatible with charger. • Added arreting screw. Your phone stand will not ever fall again! 🤯 • Added support legs for better mobile stability. • The gears fit together better, which allows for more comfortable tilting. • Smooth design. • No gluing is needed here. (Otherwise I made a profile where there are parts with clearance. This version requires the use of glue) • Added version with clearance. The guide groove has been enlarged so that free movement is achieved A VERSION FOR THICKER PHONES - 01_Stand_Wider The space between the support legs was increased to 14 mm. The charger slot for larger charging connectors was also widened to 15 mm! A VERSION WITH CLEARANCE • It may happen that main version will not be assembled due to small clearances. Actual clearance depends on many factors (flow, filament, printer condition) • Parts with the letter C in their name are parts that have increased clearance. These parts must be glued

Podobné modely