Rugged Box with Modular Slots (Parametric) - Shallow height

O modelu

The rugged box and inserts are based on my parametric “Rugged Box”. The size of the inserts (and the box itself) can be modified in Fusion 360 (f3d file available in the files section). Update: In the meantime I also created a version with two (or more) rows, which can be found here. There's also a version which has higher slots and provides many different inserts for batteries, SD cards or GoPro.   Support my work For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France). I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉). If you want to support my work directly, you can buy me a coffee. If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links (the code only works for the first order of each printer model): | CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S | Also check out my other models. If you would like to buy the screws, square nuts or threaded inserts shown in the pictures, you can find them here: • Allen hex socket button head screw • Hex socket set screws • Stainless steel square nuts • Brass heat threaded Insert nut set   Inserts In Fusion 360 you can increase the “InsertDummies” parameter to add additional blank inserts to design your own ones very easily. Various inserts are included already: • Simple container (1-4 slots wide) • 2 slots wide containers divided by 2 and 3 NOTE: You can (and SHOULD) fine tune the inserts in your slicer to make them fit perfectly as you want them to fit (firmer or looser), if you don't want to change it in F360. For smaller changes this is much more convenient. Select the insert, make sure the “ratio-lock” is disabled and slightly adjust the X and/or Y dimensions as needed (here I changed X and Y by 0.05 mm to make them slide in smoothly):   Assembly You will need six 30mm