Robot in the rain - HueForge

Ai Generated Robot in the rain hueforge print   Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Fossil Grey Transmission Distance: 0.3 PLA PolyTerra Army Brown Transmission Distance: 0.3 PLA PolyLite White Transmission Distance: 5 Swap Instructions: Start with Charcoal Black At layer #7 (0.64mm) swap to Fossil Grey At layer #12 (1.04mm) swap to Army Brown At layer #18 (1.52mm) swap to White for the rest.