matplace
RepRack: Open Source Spool Holder And Storage System by Repkord

RepRack: Open Source Spool Holder And Storage System by Repkord

autor Repkord · Printables

Máte soubor? Vytiskněte ho na naší tiskárně

Licence modelu (CC BY (s uvedením autora)) dovoluje i komerční použití. Stáhněte si soubor u zdroje a nahrajte ho k nám. Autora a zdroj uvedeme u objednávky za vás.

Nahrát soubor a vytisknout
Licence
CC BY (s uvedením autora)
Největší rozměr
asi 1200 mm
Odhad tisku
asi 450 g filamentu, 18 h 0 min
Cena u nás
od 1 110 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.

O modelu

NOTE: We now have a CLUBS page for exclusive RepRack upgrades like our Parametric Modular Shelving, RepRack XL as well as other cool stuff. PLEASE consider joining to support more development of this handy storage system! Welcome to RepRack! A modular, inexpensive, functional, easy to source, mass filament storage and spool holder system. Wall mountable or for use on the desktop. RepBox compatible. All source files are included to either 3D print or laser cut your own. The rail system is compatible with our new slip rod covers allowing you to print directly from the rack in any number of configurations. To give you a sense of expense a 10 foot long RepRack holds ~50 spools and costs about $20 or so in materials depending on how you decide to make it. Ready to make your own? Read on: The hallmark of the RepRack system is its versatility. You may wish to use it for storing large amounts of filament spools neatly on your walls. Perhaps you want a small rack to hang above your printer that you can print directly from. Maybe desktop use with anti-skid feet is your preference? Perhaps you want a rack you can load and unload from your RepBox… we've got you covered there too. Take a look at the photos to get a sense of how the system works. You can print or laser cut as many or as few of the RackHangers as you need. If you are printing them we HIGHLY recommend using the thickest nozzle you can as that will greatly increase the part strength. Locate the hangers everywhere you can anchor it to a wall stud or something secure. For hanging options you may use continuous french cleat strips or the provided individual brackets. If using printable brackets again use the thickest extrusion you can for the most strength and locate them closer together. Laser cut hangers may be spaced up to 32" apart OC typically if using ¼" thick (6mm) material. For laser cutting we recommend melamine or plywood. Never plain MDF. 3/16" (4-5mm) May also be suitable if used in closer spans. When

Podobné modely