matplace
Print-in-place fidget ring

Print-in-place fidget ring

autor Makkuro · Printables

Vytiskněte si ho pro sebe

Licence (CC BY-NC (jen nekomerčně)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
CC BY-NC (jen nekomerčně)
Největší rozměr
asi 25 mm
Odhad tisku
asi 8 g filamentu, 45 min
Cena u nás
od 85 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.

O modelu

Have fun with this fidget ring!  I uploaded many sizes (inner diameter in mm from 12.3mm for kids to 24mm for big fingers, please use the conversion table below in case you are used to your local ring sizes and use the closest value in millimeter) and three ring widths ("normal" - as seen in the picture, "thin" and "wide"). The STL filenames have both the style (normal/thin/wide) and the inner diameter in mm in the filename. For conversion of ring sizes, please use the “Ring size conversion table” at the end of this instructions page. Full customization To customize your own version (size, width, thickness, gap, etc) use the makerworld online customizer or install OpenSCAD on your own computer and follow the customizing instructions below or follow these in depth instructions. Printing In case the inner ring does not stick well enough to the build plate, use the STLs in the folder “OnlyIfYouHaveProblems__Big_inner_Ring_for_more_adhesion”. It has a thicker inner ring, but also more area on the build plate. In the unlikely event that the ring is fused together(e.g. possible when your printer is not calibrated properly and has overextrusion), use an STL from the folder “OnlyIfYouHaveProblems__Ring_with_extra_wide_clearance”. It has not 0.7mm clearance but 1.4mm(!) clearance.   Thanks go out to aubenc for the knurledFinishLib_v2 and to Betsy Weber for her fotos of the multicolor rings. If you could take a picture of an actual print, please “add a make” and attach the picture. - I am curious to see your uses in the wild! Please let me also know how you rate the design. Unfortunately, the uber fidget ring was deleted due to a design claim, so its no longer available. If you like it, you can check out the dual fidget ring: And the discrete (as in discontinuous/quantized) fidget ring: And the discrete fidget ring - Mark II: Then the slim fidget ring: The Longitudinal fidget ring: And the geared fidget ring: The alternative geared fidget ring II: And there ar

Podobné modely