PETG Tuned X1C Print Profiles for Bambu/OrcaSlicer

O modelu

Change log: • Added a PA-tuned profile for Bambu's PETG-CF (4/19/23). I usually use the Bambu presets.. but I was/am struggling with this filament. I do not recommend it. • Added Overture Army Green PETG (4/20/23) • Added California Filaments Matte Black PETG (5/2/23) • Added California Filaments Golden Yellow PETG (5/2/23) • Added California Filaments Glow (clear) PETG (5/2/23) • Added Prusament Matte Black PETG (5/6/23) • Retuned Prusament Galaxy Black PETG (5/19/23) - *updated settings. • Retuned California Filaments Teal, Fluorescent Orange, & Cloudy White colors (5/28/23) - *updated PA Values, improves edge cases & wall strength. • Added Prusament Ocean Blue PETG (5/29/23) • Added Prusament Carmine Red PETG (6/4/23) • Updated/Retuned Prusament Matte Black PETG & California Filaments Clear PETG (6/5/23) • Updated/Retuned California Filaments Yellow PETG (6/11/23) • Updated/Retuned AMOLEN Rainbow PETG (7/1/23) • Added Prusament Chalky Blue PETG (7/19/23) • Fixed a mistake in Prusament Carmine Red PETG min layer time (7/20/23) • Added Prusament Yellow Gold PETG (7/20/23) - this filament tunes fine, but man is it an ugly color. Do not recommend unless you want the color of bile. They should've called this “diseased yellow”. • Added Prusament Transparent Orange PETG (7/28/23) Boost MeIf you enjoy my work, feel free to boost me.  I do work hard on it and all my stuff is free! What this is: This is a collection of all of my PETG filament profiles for all filaments I've used of this type. I happen to have a decent amount of California Filaments because I've found that brand works well with this printer, and you can push the flow rates higher with it than some others. I will update it as I tune new filament brands and colors. They are generally tuned for flow rate, pressure advance, and temperature and volumetric flow limits and overrides. They're a good working starting point for anyone struggling with a filament. I've also tuned other types of filam