PET Filament Machine

O modelu

Overview: This is my version of machine to recycle PET bottles to filament for 3D printer.  Here you can see my setup with two units in operation. Bill of Material: • Base  • Plywood 150x600mm (one unit)   • Spooler • Body • 1x Spooler_Side_Right.stl • 1x Spooler_Side_Left.stl • 1x Distance_Top_Back.stl • 1x Distance_Top_Front.stl • 2x Distance_Bottom_Mount.stl • 2x Bearing 625ZZ • 5x Screw M5x100mm (flat head) • 4x Dome Nut M5 • 1x Nylon Lock Nut M5 • 5x Washer M5 • 4x Screw 4x25mm • Motor • 1x Gear Reduction Motor with 8mm diameter and 25mm length D-shape shaft, 6 or 10 rpm, (i.e Gear Reduction Motor JGY-370)  • 1x Gear_17.stl • 1x Set screw M3x10mm • 1x Nylon Lock Nut M3 • 1x Motor_Mount_Front.stl • 1x Motor_Mount_Back.stl • 4x Screw M3x10mm (flat head) • 1x Motor_Mount_Lever.stl • 1x Motor_Mount_Connection_Rod.stl • 2x Screw M3x6mm • 1x Screw M3x15mm • 6x Washer M3 • 1x Nylon Lock Nut M3 • 1x Motor_Cover.stl • 4x Screw M3x6mm (round head) • Spool • 1x Gear_55.stl • 1x Spool_Cylinder.stl • 1x Spool_Side.stl • 16x Screw 3.5x20mm   • Cooler • 1x Fan_Holder_5015.stl • 2x Nut M3 • 2x Screw M3x25mm  • 4x Washer M3 • 1x Fan 5015 (i.e. 5015 Cooling Fan)   • Heater Block • 1x Al block 30x25x38mm (see Heater_Block.pdf) • 1x Al plate 30x70x8mm (see Heater_Block.pdf) • 1x Nozzle drilled 1.7mm • 2x Screw M6x90mm (M6x100 shortened to 90mm) • 4x Nut M6 • 4x Screw 3.5x20mm • 1x 50W Cartridge Heater (i.e Cartridge Heater)   • Strip Director • PET_Strip_Director.stl • 2x Screw 3.5x20mm   • Control Box • 1x Control_Box.stl • 1x Control_Box_Back.stl • 1x Motor_Controler_Enclosure.stl • 4x Nut M3 Nut • 4x Screw M3x10mm • 4x Screw 3.5x20mm • 1x Thermostat with K type thermocouple (i.e. Thermostat). The termocouple should M6 mounting screw. • 1x DC Motor Speed Controller (i.e. Speed Controler 5A)   • Feet • 4x Foot.stl • 1x Foot_template.stl (if you want to predrill the holes for screws) • 4x Rubber pads 40mm diameter