[Official Remix] Flexi Extra Size Cat (Print-in-place)

[Update] ---2025/01/21--- Ultra size cat released!! It is about twice as long as Extra size and looks like a dragon, so looong!   This is a super long version of “Flexi Holding Cat” which was previously released. Since there were many requests for longer cat, I decided to release it as an Official Remix. The size is about 29 cm, which is the length of three regular size cats. Since the model is in a coiled state, it can be 3D printed with a small printer such as Bambu A1 mini. Print in Place with no supports. No assembly required. Please take pictures of your Flexi and share them with us! ⚠Notice⚠  There have been a number of cases in the past where remixes of “Flexi Holding Cat”, such as this one, have been released without permission. The problem was not so much that the models were modified, but that the licenses were changed at will. Since I have separate licenses for commercial and free versions, having multiple different licenses for the same model could be misleading to users. To prevent this, I decided to make the remixes officially available to the public. Please do not upload models for remixing if you are not allowed to do so by the license, and keep the remixes for private use between acquaintances. And please note that we do not permit the release of remixes that are not permitted by the license under any circumstances.   Print Settings Printer Brand: Bambu Lab Printer: A1 Mini Rafts: No Supports: No Resolution:0.2mm Infill: 10-15% Notes: {Recommend} Layer Height: 0.2mm Print Speed: 60mm/s Outer Wall Speed: 10mm/s Z Seam Alignment: User Specified Z Seam Position: Aligned Z Seam Corner Preference: Hide Seam {Recommend: Bambu Lab Printer} Layer Height: 0.2mm Seam Position: Aligned Wall Loops: 3 First layer: 30mm/s Outer wall: 30mm/s Prime Tower Width: 10mm Prime Volume: 10mm^3 Prime Tower Brim Width: 0mm   💰Commercial Use💰 This model is not available for commercial use under "CC BY-NC-ND 4.0" below. Therefore, I am selling the upgraded model with additional detailing and a license for commercial use. If you want to sell my model commercially, please check my Cults, Etsy, and MyMiniFactory. https://cults3d.com/en/design-collections/3dflexseeds/commercial-use-ver  https://flexseedsshop.etsy.com  https://www.myminifactory.com/users/3dflexseeds/collection/commercial-ver  On Patreon, you can purchase public commercial models at a special discount, and new releases are available for free present🎁 In addition, you can get monthly exclusive models and generous welcome pack!! https://www.patreon.com/FlexSeeds    ⚠Warning⚠ Be careful in environments with young children and pets! This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place. Do not apply strong force! Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately. Store them in an appropriate place. After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.