matplace
Microscope objective Funnel stops - fits (almost) any model

Microscope objective Funnel stops - fits (almost) any model

autor patta · Printables

Vytiskněte si ho pro sebe

Licence (CC BY-NC-SA (jen nekomerčně)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
CC BY-NC-SA (jen nekomerčně)
Největší rozměr
asi 45 mm
Odhad tisku
asi 12 g filamentu, 1 h 8 min
Cena u nás
od 100 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.

O modelu

Funnel stop design for microscope objectives, fully customizable in OpenSCAD It offer many options to fit most objectives; can also generate other stops like Condenser darkfield stops, eyepiece field stop etc. The Funnel models are designed to be printed from the base up; the other models from the tip up. They are already oriented correctly, z+ up. For OpenSCAD, don't forget the JSON file that has the nice presets - it is at the bottom as .txt Loaded here also some ready made  STL designs for eyepieces I've used.     Printing: Designed to be printed straight away without supports or rafts.   I used PLA; also other materials may go well if they allow good precision. Those are SMALL things with fine details, they need precision, show your skills, best is use the smallest build height and ridiculously slow speed. The fine screw threads may need 2-3 trials before getting them right, as they need to hit 0.2-0.3 mm precision. Some designs (tall, thin)  may like a brim, most don't need.  Do NOT make a raft.

Podobné modely