lampshade IKEA

Ceiling lampshede for IKEA ceiling cable HAVSDJUPI did reconstruction of my office and all the time- ceiling cables stayed unfinished - without any touch or personalization - but not any more. I created this basic lampshades inspired by golden ratio spiral that fit PRUSA MINI bed size (yep, i got one) Printed in VASE mode - i used 0.4mm nozzle (i lost my wider one- otherwise i would go 0.8mm) I share my print settings for white PLA - feel free to adjust it and i strongly recommend to use bigger nozzle size Category | Setting | Default settings | My settings Filament | Extrusion multiplier | 1 | 1.1 Temperature | Nozzle temperature | 205 | 210 Retraction | Retraction Length | N/A | 0 Cooling | Fan Max | 100 | 80 Cooling | Fan Min | 100 | 80 Extrusion width | External perimeters | 0.4 | 0.6 Extrusion width | Perimeters | 0.4 | 0.6 Overlap | Infill/perimeters overlap | 23% | 35% Speed | External perimeters | 25 | 15 Speed | Small perimeters | 25 | 15 Infill | Fill density | 15% | 0% Vertical shells | Perimeters | 3 | 1 Vertical shells | Spiral vase | false | true Horizontal shells | Top solid layers | 5 | 0