HexScraper - Printbed Scraper - Blade Swap Mod

O modelu

Features: • Swappable blade to avoid having to print a whole HexScraper when yours is worn out. • Hexagon with screw threads to secure a 8x2.7mm magnet. • Hollow Hexagons for decoration. • 2 Types of blades included: 2 Piece and Single Piece blade. Magnet set I used: https://www.amazon.ca/gp/product/B07MV2MKD5/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1   Description: I needed to get a scraping tool to get my prints off the steel sheet and found the original HexScraper.   Then I saw this version: https://www.printables.com/model/253790-hexscraper-mit-auswechselbarer-klinge   I realized (even though I don't speak German) that the edge would get worn out and would need to print another one after a while, but I liked the aesthetics of the original one and didn't want to have to use screws, so I designed a version that can have a swappable blade so you only need to print that in the future. Because there are now 2 points of connexion, I decided to include a 2 piece and a 1 piece version, in case you need something sturdier.   I also got inspired by the following remix: https://www.printables.com/model/251230-hexscraper-with-magnet   But I don't like commitment, so I designed a Hexagon magnet holder with screw threads so I can get my magnet back easily later on. (Or use it on another hex project with same hexagon size).   I also stole the following design, just made the tolerances a bit tighter: https://www.printables.com/model/249697-hexagons-for-hexscraper   Print Notes: I included a 3mf file with the correct orientation to print the blades and the holder. The STLs are also oriented the right way for printing. The 2 piece blade edge is printed upside down to avoid overhangs and same goes for the handle itself. I'm printing at 0.15mm with 15% infill using PLA.   Notes about assembly: I made the tolerances tight, so it might need some fiddling to assemble.   For the 2 piece blade → Slide the edge piece with the first layer printed fac