Full Desk Organizer & Monitor Stand + Stackable Drawers

O modelu

Introducing a complete set of modular components that enable you to build a beefy, strong, full desk organizer set and monitor stand. This organizer finishes out at about 4 3/8 inches tall and 8 inches deep. The set includes a "narrow" version and a "wide" version of the drawer cases. And the angle of the corner piece is just shy of 35° (34.8244 to be exact). More sizes to come in the future if you request them. PLEASE post your makes & comments - as this helps motivate me and inform me of any issues. I truly appreciate it. Happy printing! Notes: The wider drawers (and their cases) require at least a 300mm printer bed and will not work on a Bambu X1C, P1S, A1, or Ender series printer. However, you can certainly use the smaller drawer components and just print more of them to make up the difference. Check the REQUESTS folder for other sizes too! I recommend a layer height of 0.25 to help speed things up with no compromise in print quality. NO SUPPORTS REQUIRED. In fact, you should disable support auto-generation for these files. PLA is fine, although you can certainly use other materials if you wish. I highly recommend Sunlu Matte Black PLA for the cases and top plates. The finish is superb in my opinion. Depending on what material you choose (some filaments shrink more than others), and the accuracy of your printer, some parts (like the M5 pins or the dovetail clips, and perhaps the drawers) may be pretty snug. First make sure your Z offset is spot on to eliminate any elephant's foot. You can scale these parts in your slicer (very minimally!!, like 0.2mm) to help improve tolerances for your setup. If you scale the M5 pins, remember to keep the height at 10mm. I RECOMMEND PRINTING ONE PART AT A TIME TO TEST THE FIT, before you waste a bunch of filament. M3x8 screws should work well for attaching the drawer handles, if you want to use them. Just screw directly into the drawer holes (no heatset inserts required, but you can add them if you want to). Updates: • 2