matplace
Flexi Leaf Dragon(Print-in-place)

Flexi Leaf Dragon(Print-in-place)

autor 3D_Flexseeds · Printables

Vytiskněte si ho pro sebe

Licence (CC BY-NC-ND (jen nekomerčně, bez úprav)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
CC BY-NC-ND (jen nekomerčně, bez úprav)
Největší rozměr
asi 180 mm
Odhad tisku
asi 85 g filamentu, 6 h 20 min
Cena u nás
od 322 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.

O modelu

[Update] ---2024/02/07--- Straight type is now available. ---2024/05/07--- Free 3mf file released!!  If you want to make multiple prints, use various 3mf for Bambu and Prusa. ---2026/05/06--- Fixed an issue where the limb segments of the medium dragon (square type) were fused to the rear segments. This is Flexi Leaf Dragon. The scales are designed in the shape of leaves, and the wrists are flexible and movable. Print in Place with no supports. No assembly required. In addition to the standard Flexi Dragon-like size model, a medium size model, reorganized in a lizard style, is included. The medium size requires 30% less filament and time to 3D print than the large size; if 3D printing time is a concern, the medium size is a good choice. Please take pictures of your Flexi and share them with us!   💰Commercial Use💰 This model is not available for commercial use under "CC BY-NC-ND 4.0" below. Therefore, I am selling the upgraded model with additional detailing and a license for commercial use. If you want to sell my model commercially, please check my Cults, Etsy, and MyMiniFactory. https://cults3d.com/en/design-collectio ns/3dflexseeds/commercial-use-ver  https://flexseedsshop.etsy.com  https://www.myminifactory.com/users/3dflexseeds/collection/commercial-ver  On Patreon, you can purchase public commercial models at a special discount, and new releases are available for free present🎁 In addition, you can get monthly exclusive models and generous welcome pack!! https://www.patreon.com/FlexSeeds    Print Settings Printer Brand: QIDI Printer:  S-Box Rafts: No Supports: No Resolution: 0.2mm Infill:  15-20% Filament: TINMORRY PLA Silk Green Notes: Layer Height: 0.2mm Print Speed: 60mm/s Outer Wall Speed: 20mm/s Z Seam Alignment: Sharpest Corner Z Seam Corner Preference: Hide Seam   ⚠Warning⚠ Be careful in environments with young children and pets! This model contains small parts. If not properly stored in an environment with young children or pets

Podobné modely