Google Nest Gen 2 Wired Doorbell Spacers (Flat & Angled)
MakerWorld · bri0nac
autor Molodos · Printables
Licence (CC BY-NC-SA (jen nekomerčně)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.
Nahrát soubor a vytisknoutBox for multiple Samples: Check out here Smart Version with NFC: Check out here This filament samples are designed to show many features as well as having a space for information about the filament Features • Thin walls test (3, 2, 1.5, 1mm) • Material type display (Currently PLA, PETG, TPU, ASA, ABS and a blank version are available) • Hole for a key ring • Thickness/shine through test (0.2, 0.4, 0.6, 0.8, 1.0, 1.2mm) • Round holes (2, 3, 4, 5mm diameter) • Layer visibility test • Area for adding information about the filament Recommended print settings • Layer Height: 0.2mm • Sparse infill pattern: Cubic • Sparse infill density: 25% • The sum of top and bottom shell layers should be at least 6 • No supports needed Printing and Assembly • Optionally, you can add some sort of key chain in the top right corner (I recommend this chain (affiliate link)) • After printing, you can optionally add some sort of key chain in the top right corner of the sample • When having many samples, you might want to also consider to print my box for them (linked at the top of the description) You like my work? Consider to buy me a coffee :D
MakerWorld · bri0nac
MakerWorld · R C 3D
MakerWorld · IXPatch
MakerWorld · Ukdavewood
MakerWorld · keeeal
MakerWorld · vr6syncro
MakerOnline · FlwidPrint
MakerOnline · FlwidPrint
Cookies a měření. Nezbytné cookies jsou vždy; měření návštěvnosti a reklamy jen s vaším souhlasem. Víc o cookies