matplace
Drybox | Cheap Filament Storage Box | Polydryer Compatible Dry Box

Drybox | Cheap Filament Storage Box | Polydryer Compatible Dry Box

autor Extrutim · Printables

Vytiskněte si ho pro sebe

Licence (jen pro osobní použití) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
jen pro osobní použití
Největší rozměr
asi 180 mm
Odhad tisku
asi 185 g filamentu, 7 h 0 min
Cena u nás
od 462 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.

O modelu

I wanted a Drybox that is as affordable as possible without compromising on features! There are already many designs out there that use the well-known cereal box as a basis, but none of them met all my criteria. I wanted to change that. The dry box is compatible with the Polydryer from Polymaker using an adapter, but if you don't have this filament dryer, it doesn't matter, as no additional parts are used except for the external adapter. Features: • Low material consumption, only ~90g of filament • Affordable, around €10 per box • Replaceable, customizable labels • Hygrometer • Ball bearings for spool guidance • Also suitable for spools up to 70mm wide • Compatible with Polydryer without modifications to the box • Plenty of space for silica gel beads, primary container + optional secondary container The box is made of PP, a material that does not allow moisture to pass through and is therefore ideal for a dry box. Only 1-2 10mm holes are drilled for the PTFE tube (depending on whether you want 2 couplings for an alternative filament guide or to store the tube after unloading it from the printer). Instead of making the box itself compatible with the Polydryer by adding major features, I made a separate adapter. You open the lid and lift the base off the lid using the handles on the right and left of the hygrometer, then slide everything onto the adapter. What you need: • 4x ball bearing 5x16x5 (625zz / 625-2RS) • 4x screw M5x16-20mm (button, pan, or round head) • 1x hygrometer (this standard rectangular one) • 1-2x PC4-M10 pneumatic coupling • 1x food storage container 4L (note the two variants in the image. The variant with 3 side grooves can accommodate wider spools) • ~90g filament (PETG/PCTG recommended) +130g for Polydryer adapter and drilling jig • ~20g Flex filament shore 82a or softer (only for printed coupling or sealing cap for pneumatic coupling) • 4mm PTFE tubing (2.5mm inner diameter recommended) • 10mm drill bit (step drill bit re

Podobné modely