Butterfly

O modelu

"Butterfly Automaton" is a simple, press together manually operated butterfly automaton. Simply turn the handle and the butterfly's wings come alive. As usual I probably forgot a file or two or who knows what else, so if you have any questions, please do not hesitate to comment as I do make plenty of mistakes. Designed using Autodesk Fusion 360, sliced using Ultimaker Cura 4.12.1, and 3D printed in PLA on Ultimaker S5s and an Ultimaker 3 Extended. Parts. I 3D printed the following parts at .15mm layer height, 20% infill: • One "Arm, Left.stl". • One "Arm, Right.stl". • One "Axle, Cam.stl". • One "Axle, Handle.stl". • One "Axle, Wings.stl". • One "Base.stl". • One "Cam.stl". • One "Handle.stl". • One "Head.stl". • One "Tail.stl". • One "Wing, Left.3mf", dual extrusion. • One "Wing, Right.3mf", dual extrusion. • One "Yoke.stl". This model is a fairly high precision print and assembly using at times very small precision 3D printed parts in confined spaces with highly precise alignment. I sliced my parts using Ultimaker Cura 4.12.1 "Engineering Profile" which provides a highly accurate tolerance requiring minimal if any trimming, filing, drilling or sanding. However, prior to assembly, I still test fitted and trimmed, filed, drilled, sanded, etc. all parts as necessary for smooth movement of moving surfaces, and tight fit for non moving surfaces. Depending on your slicer, printer, printer settings and the colors you chose, more or less trimming, filing, drilling and/or sanding may be required to successfully recreate this model. I carefully filed all edges that contacted the build plate to make absolutely certain that all build plate "ooze" is removed and that all edges are smooth using small jewelers files and plenty of patience to perform this step. Butterfly Assembly. To assemble the butterfly, I performed the following steps: • Pressed "Axle, Wings.stl" into "Tail.stl". • Slid the axle part way into the rear axle hole in "Wing, Left.3mf". • Positioned "Wing