Articulated Crystal Night Dragon v1.3 (low poly remix)
autor AKinferno · Printables
Vytiskněte si ho pro sebe
Licence (CC BY-NC (jen nekomerčně)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.
Nahrát soubor a vytisknout- Licence
- CC BY-NC (jen nekomerčně)
- Největší rozměr
- asi 180 mm
- Odhad tisku
- asi 85 g filamentu, 4 h 0 min
- Cena u nás
- od 252 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.
O modelu
*** Free to print, NOT to sell *** For Commercial Rights, you must join my Club. Dec 15 - Informed there may still be an issue with the links sticking. I will correct this this weekend. Until then, just Split the model into parts or objects (the icon that looks like paper with an O or P on it). The slicer will no longer try to merge walls that are too close. It will print walls around the individual objects. Dec 10th Update - Added version 1.3. Received a couple comments about fused pieces. I believe this to be caused by the latest update to PrusaSlicer and related slicers. Because I have quite a few these printed previously on older versions of the slicer without issues. I believe they are corrected now. Please let me know if you find issues, I will correct them ASAP. I am very active on Printables and will usually correct them before the end of the day. Thanks, and enjoy! Sep 17th Update - Added v1.2 of the original model. Cleans up some of the thin sections or oddly shaped base layers. Cleaned up odd shapes, made pieces more symmetrical like the blunt model. Reassembled to ensure no bonded segments. Blunt 1.2 Update - This version should be the last needed for the blunt model. I found no touching pieces. I modified and reinforced the tail piece improving flexibility. Feedback is appreciated, so I can provide the best model possible. I have found during all this testing that separating the model into individual objects improves the slicers separation of the parts. This is why it took hours to ensure the pieces didn't touch. I would slice model, see pieces touching, separate the model and shift the offending piece. Then, merge and save, close file, reopen file, reslice and now some other pieces were connected. Rinse and repeat. It was super tedious, and may vary by slicer, so please let me know if you find some merged pieces. But I believe it is good now. Still need to update the original model, but that means both will be 1.2 in the end. Sep 6th U
Podobné modely
Buzz Lightyear Multipart Fanart
matplace
Cat
MakerOnline · Yang3D(
Stitch NO AMS
matplace
Streetwear Bowser Figure | Super Mario Urban Fan Art
Printables · Fluid Prints
Tom Cat
matplace
Flexi Factory and Bambu Lab Collaborative: Panda Bear and Stand
MakerWorld · flexi.factory
